Inspection checks

Periodic external check of the shelving

There periodic external check of the shelving it is an important activity to ensure the safety and stability of storage facilities in warehouses, factories and other industrial environments. There external periodic verification it is performed by expert professionals, such as engineers or specialized technicians, who analyze the integrity and condition of the racking structures.

There periodic external check of the shelving includes a series of checks and tests to determine the condition and integrity of the storage facilities. The periodic external verification activities include:

Visual inspection
The visual inspection of the racking structures, in which the condition of the beams, uprights, tie rods and screws is checked, as well as the presence of any damage or anomalies.

Leveling control
Checking the leveling of the racks to make sure they are well positioned and that they are not tilted or unbalanced.

Load verification
Verification of the maximum load allowed for each level of the racks and control of load distribution.

Stability tests
The racking stability test to verify that the structure does not bend or deform under load.

Why is periodic verification important?

There periodic external check of the shelving it is important to ensure the workplace safety, prevent damage and loss of products, reduce the risk of injury and extend the useful life of the racks themselves. The external periodic verification intervals may vary according to local laws and regulations, but generally they are carried out every year or every two years.

Periodic external inspection of racking depends on various factors, including the type of racking, its intended use, its location and local safety legislation.

In general, racking should undergo a periodic external inspection at least once a year to ensure its safety and structural integrity. However, if the racks are subjected to heavy loads or are exposed to adverse environmental conditions, the frequency of inspections may need to be increased.

Furthermore, if events such as accidents, damages or seismic movements occur, it is important to carry out an immediate check of the racks to ensure that their safety and stability have not been compromised.

It is also important to consult local safety regulations to determine the frequency of periodic external inspections of racking and to ensure that all legal requirements are met.

Increase safety and reduce costs

Shelving inspections are an important activity to guarantee safety in a working environment. These checks must be carried out regularly to ensure that the racking is up to standard and does not pose a risk to workers or goods.

What is the intervention?

Racking inspections may include evaluation of the following characteristics:

General condition of the shelves: the inspector should check that there are no broken, dented or damaged parts of the racking.
Stability: the inspector should check that the racks are securely anchored to the floor or wall and that they do not move or tilt when loaded.
Load capacity: the inspector should check that the racks are capable of supporting the weight of the goods being stored on them.
Fixing system: the inspector should verify that the brackets and screws that secure the shelving are in good condition and have not loosened over time.
Maneuvering space: the inspector should check that there is sufficient room for workers to move around the racking without risking injury.
Signage: the inspector should check that the racks are properly marked and that indications of the maximum permitted weight are clear and visible.
Lighting: the inspector should check that there is sufficient lighting around the racks so that workers can see the goods being stored.

In general, racking inspections should be carried out at least once a year by qualified and competent personnel. However, if there have been any accidents or problems with the racking, it is important to carry out an immediate inspection to identify and correct any problems.

UNI-EN 15635 STANDARD

The legislation: responsibility of the user.
The standard UNI-EN 15635 “Static steel storage systems. Use and maintenance of storage equipment” declares the responsibility of the user of the warehouse to have an inspection of the system carried out annually by qualified external personnel.

The purpose of this standard is to reduce risks to a minimum and to obtain safer operation of the warehouse, avoiding damage to the racking structure.

Trust SGA

Inspection checks of racking are important to ensure safety in the workplace and prevent any accidents. They must be conducted regularly, at least once a year, or in case of significant changes to the racking structures.

It is important that the check is carried out by competent and qualified personnel who have specific knowledge of safety and shelving. Furthermore, it is essential that all necessary safety measures are taken during the verification, such as the use of adequate equipment and the protection of the work area.

If any problems or defects are detected during the check, corrective measures must be taken, such as the replacement or repair of damaged or non-compliant parts, or the adoption of additional safety measures.

Make your work environment safer

Write to us to request further information and evaluate an intervention.
Fill out the following form, we will contact you shortly.